Your house can be unbearable when your air conditioner is not working as recommended. At times, your AC unit may start blowing out hot air instead of cooling your home or stop working abruptly. Such challenges can get on your nerves, particularly in hot summers.
Remember, AC units are sophisticated systems that require the perfect balance of temperature levels, pressure, and airflow to give you optimal service. In particular, AC units are delicate and are most likely to fail along the way. Fortunately, your AC system not cooling should not always be considered an expensive repair meant to drain your pockets.

Here are a few aspects of troubleshooting when you realize that your AC system is not cooling.
The Thermostat
Though simple, the thermostat on your AC system plays a significant role. A faulty thermostat could be the reason why your AC system is running but not cooling. Someone could have switched your AC’s thermostat from “Automatic” to “Fan.” Take your time to check the thermostat settings and reset the switch to “Automatic.”
Again, while this is a simple part of your air conditioning system process, remember that we can tend to overlook this one aspect. At times we can be certain that we have done our part in fine-tuning the thermostat to our specific preferences, but we may have simply overlooked it.
It is best to look at this matter before you move on to more expensive aspects like reaching out to conduct new air-condition installation when you do not have to do so in the Monroe GA area.
Dirty Filters
Have you stayed for a couple of months before replacing the return-air filters of your AC unit? Well, these air filters could be the reason why your AC is not cooling. Remember, your AC system does quite a bit of work regularly. This means that your air conditioning system needs some level of maintenance. If you do not conduct the regular necessary level of maintenance for your air conditioning system and vents, you could find that the system is dirty and clogged.
Accumulated dust and dirt could affect the airflow of your AC system.
Remember, accumulated dirt/dust can limit your AC system from drawing insufficient air, releasing only a wimpy flow of air. You may quickly solve the problems with your AC unit by replacing its return-air filter (if you can’t see through it). If it is clean, then the problem lies elsewhere.
It is important to emphasize taking care of your air conditioning system for the best results. This helps mitigate the issues you must deal with concerning your air conditioning system.
Check Duct Malfunctions
The main blower of your central AC unit is meant to force cold air through the ducting into the rooms of your house. However, there are instances that the duct (the metallic grill that covers the opening of your HVAC’s duct) could have suffered breakages and let the cold air flow out before it is registered in your rooms.
Cold air could sometimes blow out from some of your AC’s ducts but not others. In this case, there is a possibility that the ducting that feeds these components are facing challenges. It would be a great idea to assess the ductwork once again to check for any loose joints and refit them with duct tape. You may also call an HVAC professional if the ducting joint is loosened along the wall.
If you face issues with your air conditioning system in the Monroe GA area, reach out to our air conditioning repair professionals at Pauls HVAC today. We can certainly help with your air conditioning installation, air conditioning repair, and general air conditioning service needs today.
Check and Clear the Compressor Area
Your AC unit may lack the ability to draw in adequate volumes of air if there are piles of dry leaves and debris around it. It would be a great idea to identify such issues by assessing the condition of your AC’s compressor unit (tucked at the back or side of our house).
Take time to clean away all debris or other material that may crowd your AC unit. Don’t ignore the overgrown vines around the AC. Similarly, be diligent in not placing anything on top of your AC’s compressor unit as these items may limit it from functioning effectively.
If you are finding further problems with your air conditioner and need air conditioning repair in the Monroe GA area, reach out to our professionals at Pauls HVAC today.
Do Something about the Dirty Coils
A standard AC system has two coils- the condenser coil located 0n the outer compressor unit and the evaporator coil near the indoor blower unit. Your AC unit could face challenges in taking and releasing the desired volumes of air when either coil is covered with debris or mold.
You may solve such challenges by cleaning the coils. In this case, the cleaning process will involve metal enclosures that protect the coils.
However, you must be keen to put off power for both the interior and exterior units before starting the cleaning process. Also, be sure to follow your AC manufacturer’s instructions any moment you begin the cleaning process.
There is a tendency that your AC unit may not attain the desired levels of operation even after initiating your assessment and DIY repairs. However, your AC could sometimes face severe issues like having a failed compressor unit and freon leakages. In this case, it would be advisable to seek the services of an HVAC professional.
If you need assistance with your cooling system and HVAC systems in the Monroe GA area, reach out to our professionals today.
Contact Pauls HVAC For Your HVAC System Needs in Monroe GA
If you need assistance with your air conditioning installation, air conditioning repair, and general heating and cooling system needs in Monroe, GA, reach out to our professionals today.
We are pleased to respond to your call in an orderly fashion and resolve your HVAC system issues as quickly as possible.